The file 'Product Improved – RUAG AmmoTec (Grey Plastic) Stripper Clip Guide/Adapter/Loader/Spoon 3D Printer Model' is (stl) file type, size is 22.8KB.
Product Improvement of - https://www.thingiverse.com/thing:5228557
Shown as the White Plastic Part in the Photo.
Designed for Use with the RUAG Grey Plastic Stripper Clips. (GECO/Norma & Some Swiss Made Surplus Ammo)
The Improved Design CAN Work with USGI Style Metal Clips.
(Align the Clip with the Clip Guide by Pulling the Top of the Clip towards the Rear of the Magazine)
(Not Recommended, due to Excessive Free Space)
List of Changes:
Enlarged Magazine Guide Rails (2X in Depth)
Added Clip Stop Bar (Clip Over-Insertion Stop)
Exterior Re-Design + Reinforcement
Operation Tips
Pushing Down with Constant Pressure on the Mid-Rear of the Cartridge would provide the best results.
Holding the Clip Down against the Clip Stop can help rounds feeding.
Should (But Not Tested Yet) also work with 3D Printed Clips from - https://www.thingiverse.com/thing:3071657
Tested with
USGI-Style Stainless Steel (10 Round)
Magpul PMAG Gen M3 (10 & 30 Round Magazines - Limited to 5)
Thermold 10MS
Cross Industries Canada - 10/10 Cross Mags
Disclaimer & Warranty
The Printed Object Can Have SHARP Edges. Be Careful.
The Design is provided "AS IS", in accordance with the Creative Commons Public Licenses Version 4.0.
| PI-RUAG-Clip-Guide.stl | 69.2KB |
