Pro10 / Pancar Body Reinforcement 3D Printer Model
The file 'Pro10 / Pancar Body Reinforcement 3D Printer Model' is (stl) file type, size is 81.9KB.
The file 'Pro10 / Pancar Body Reinforcement 3D Printer Model' is (stl) file type, size is 81.9KB.
if you like this design please tip me :-)
Here you will find Zip file containing an STL file and some pictures to print two part to get a reinforcement for your pro10 / pancar body
The part with a small dot have an angle of 40° from horizontal
The part with a big dot have an angle of 50° from horizontal
Once printed, you will have to drill both holes to 1,5 mm diameter. For assembly you need a carbon rod (1,5mm) cut to desired lengh.
Final assembly can be done with glue (best results with Shoegoo)
Print in place (no support needed)
UPDATE :
I've added 2 part on the Final STL that have got an angle of 20° from horizontal.
The reinforcement parts have been tested on Viola Pancar body.
| Pancar-Body-Reinforcemen-Final.stl | 799.6KB |
