Basic cage / prison with doors that open and close.
You will need to print:
2 of Base with stopper.stl
4 of Lock bar.stl
2 of Door.stl
12 of Bar.stl
Some light sanding may be required for the lock bars if printed with supports, you can alternately rotate them 90 degrees and print them without supports
| Bar.stl | 79.6KB | |
| Base_with_stopper.stl | 1.2MB | |
| Door.stl | 253.4KB | |
| Door_Lock.stl | 59.3KB | |
| Lock_bar.stl | 91.5KB |
