Prisgon Puzzle By Markus Götz 3D Printer Model
The file 'Prisgon Puzzle By Markus Götz 3D Printer Model' is (stl) file type, size is 6.5KB.
The file 'Prisgon Puzzle By Markus Götz 3D Printer Model' is (stl) file type, size is 6.5KB.
Printing the base requires to print the top part first to be inserted in the bigger part during the print to eliminate supports. Put a pause before the layer where the overhang is printed and insert the base top part. Then continue printing. The overhangs will lay down on the inserted part.
| BaseBottom.stl | 5.0KB | |
| BaseTop_PRINT_FIRST.stl | 3.4KB | |
| Piece1.stl | 1.6KB | |
| Piece2.stl | 1.4KB | |
| Piece3.stl | 684.0B | |
| Piece4.stl | 1.4KB | |
| Piece5.stl | 1.6KB | |
| Piece6.stl | 2.3KB | |
| Piece7.stl | 1.1KB | |
| Piece8.stl | 2.8KB |
