Printrbot Simple X Upgrade. 3D Printer Model Free Download

Description Files (13)

Summary

Increase your X travel to GT2 belt drive and 165mm print area while keeping the stock print plate. Larger area is capable with a custom plate.

Requirements:

Well calibrated printer.
Ability to print 98 mm x 98 mm (use "Orientated" files), or print 125 mm length (use standard files). I installed my Y-Axis No-Sag upgrade first, then printed parts for this one (http://www.thingiverse.com/thing:242185).
8mm linear rods 87 mm longer than the hole center distance on your print bed. For the stock bed, that would be 254 mm long rods, which gives you 165 mm print area.

2014-03-10: Updated Rod ends to increase thickness next to bed mounting bolts.

2014-03-19, RevB: Updated Rod Ends to increase thickness next to belt slot. Updated RodEnd-Mirror to move belt anchor away from Simple 2014 fan. The stock fan should clear nicely now.

2014-05-13: Added a couple files to allow for any length rod to be used. By installing "RodEnd-Mirror-Mid.stl" at the edge of your bed, and "RodEnd-Mirror-Overhang.stl" at the end of your rods, the rods can extend well past the edge of the print platform. Pass the belt thru the Mid part and anchor on the Overhang portion. This way the belt tension will pull on the ends of the rods and not bind the bed leveling screws.

Design inspired by ahaer http://www.thingiverse.com/thing:215294

BearingCap608.STL	37.6KB
MotorMountXGT2.STL	345.5KB
RodEnd-Mirror-Mid.STL	1.0MB
RodEnd-Mirror-Oriented.STL	992.4KB
RodEnd-Mirror-Overhang.STL	240.5KB
RodEnd-Mirror.STL	992.9KB
RodEnd-Oriented.STL	1017.7KB
RodEnd.STL	1017.1KB
RodEndRevB-Mirror-Oriented.STL	1.1MB
RodEndRevB-Mirror.STL	1.1MB
RodEndRevB-Oriented.STL	1014.5KB
RodEndRevB.STL	1014.3KB
TensionBlockYGT2.STL	25.9KB

Printrbot Simple X Upgrade. 3D Printer Model

Summary

Tags

You might also like