Printing With Flexible Filaments On The Creality Ender-3 And CR-10 3D Printer Model
The file 'Printing With Flexible Filaments On The Creality Ender-3 And CR-10 3D Printer Model' is (stl) file type, size is 109.3KB.
The file 'Printing With Flexible Filaments On The Creality Ender-3 And CR-10 3D Printer Model' is (stl) file type, size is 109.3KB.
FlexiStruder for Creality Ender-3 and CR-10
Necessary for printing from the flexible filaments.
Flexible filament settings by Maker's Muse:
https://youtu.be/fTJz6vMvtJ8
BOM:
1x MK8 drive gear
1x PC4-M6 fitting from stock extruder
1x 608zz bearing
1x M5x10mm half-round head screw
3x M3x8mm allen head screws
1x M3x20mm allen head screw
1x M3 washer
1x compression spring from stock extruder
Printed from ABS without support and rafts:
layer height: 0.16mm
perimeter shells: 3
top & bottom layers: 3
infill: 33%
Note:
Don't forget to extruder calibrate + change the microsteps value for the extruder in the Marlin firmware.
| Arm.stl | 192.4KB | |
| Body.stl | 154.9KB |
