Printer Front Bracing ,for Most Gantry Printer. Simple Design!! 3D Printer Model
The file 'Printer Front Bracing ,for Most Gantry Printer. Simple Design!! 3D Printer Model' is (stl) file type, size is 3.7MB.
The file 'Printer Front Bracing ,for Most Gantry Printer. Simple Design!! 3D Printer Model' is (stl) file type, size is 3.7MB.
This is my design for the bracing frame for the CR-10 printer. There are two types of adapters: the lower adapter is designed to connect to the existing M5 screws of the frame, the top adapter with holes for M4 screws, for connecting to the upper bridge.
Since I used the M8 threading rod, I designed a 8mm ball valve and 8mm ball valve with internal thread.
For most printer bottom frame scre screw is M5 so print part : BotFrameHolderM5
For some E12 bottom frame scre screw is M6 so print part : BotFrameHolderM6
In case that you have a wider fun like FANG, use the TopFrame V2 support.
Suitable for printers :
ADIMLab
Alfawise U10/U20
ANET E10/E12
Athorbot A01
Creality CR-10/CR-10S
FLSUN Plus/FL
Geeetech A30
HUAXU3D X1
JGAURORA A5X
KOHON KH01
KREATEIT KR - 10S
Lavewatch LW - 10A
RAISCUBE R10 / T8 / T9
TEVO Tornado
Tronxy X3/X3ST/X3SA
ZONESTAR Z8XM2/Z10M2
| BallNutM8.stl | 4.2MB | |
| BotFrameHolderM5.stl | 1.1MB | |
| BotFrameHolderM6.stl | 1.1MB | |
| RoundCupM8Nut.stl | 1.7MB | |
| TopFrameHolderM4.stl | 1.1MB | |
| TopFrameHolderM4_V2.stl | 747.3KB |
![[Remix] CR-10 Fan Mod 3D Printer Model](https://cdn.3axis.co/assets/01/3c/80/39/013c8039-4123-4419-8d92-a6c862619f7d/images/b659cf07-c59d-42a4-8477-f6128dc40c99_thumb.jpg)
