Printed Part Edge Cleaner / Cutter 3D Printer Model
The file 'Printed Part Edge Cleaner / Cutter 3D Printer Model' is (FCStd,stl) file type, size is 2.6MB.
The file 'Printed Part Edge Cleaner / Cutter 3D Printer Model' is (FCStd,stl) file type, size is 2.6MB.
An attachment for a cutter to clean the edges of printed parts.
The part helps to remove remains of brim for example quite clean and straight, which can rarely succeed so well with the hand without guidance.
The blades for which it is made have a width of 9.1mm and a thickness of 0.4mm (should be widely standard I think).
Please take care when inserting the blade into this part! It fits very tightly and there is a risk to hurt you if the blade brakes!
UPDATE:
Added a cleaner, remake version of the FreeCAD 0.18 file, witch cuts also +0.15mm more from printed part. STL file for this also uploaded.
This version cuts a very small chamfer on edge of the part.
| printed_part_edge_cleaner_cutter.FCStd | 834.4KB | |
| printed_part_edge_cleaner_cutter.stl | 1.4MB | |
| printed_part_edge_cleaner_cutter_CLEAN_REMAKE.FCStd | 355.2KB | |
| printed_part_edge_cleaner_cutter_PLUS_0.15mm_MORE_CUT.stl | 1.7MB |
