Printed – 3D Puzzle Eagle 3D Printer Model
The file 'Printed – 3D Puzzle Eagle 3D Printer Model' is (stl) file type, size is 3.2MB.
The file 'Printed – 3D Puzzle Eagle 3D Printer Model' is (stl) file type, size is 3.2MB.
This is a Remix of the LaserCut - 3D Puzzle Eagle located here:
http://www.thingiverse.com/thing:30990
(All credit for this design goes to jtronics)
I really wanted to print this, so I took the .dxf file provided by jtronics (see link above) and imported it into Blender 3d and added depth.
It took a bit of tinkering to find the right thickness. I found that 1.35mm fit together perfect for my printer. If it doesn't for you, you'll probably have to adjust the thickness manually like I did.
Another good thing about 1.35mm is that I can print at .27mm layer height and get exactly 5 layers. Also, I printed at 100% infill
| Back.stl | 353.9KB | |
| Back_Large.stl | 82.5KB | |
| Back_Medium.stl | 71.0KB | |
| Back_Small.stl | 71.0KB | |
| Base.stl | 454.5KB | |
| Base1_Plate.stl | 1.5MB | |
| Base2_Plate.stl | 1.0MB | |
| Body.stl | 331.3KB | |
| Body_Plate.stl | 1.2MB | |
| Connector.stl | 76.4KB | |
| Feather1.stl | 115.5KB | |
| Feather2.stl | 71.0KB | |
| Feather3.stl | 69.1KB | |
| Feather4.stl | 59.9KB | |
| Feather5.stl | 58.0KB | |
| Feather6.stl | 57.9KB | |
| Feather7.stl | 57.7KB | |
| Feather8.stl | 57.7KB | |
| Feather9.stl | 57.5KB | |
| FeathersMisc_Plate.stl | 2.2MB | |
| Foot.stl | 82.9KB | |
| Half_Ring.stl | 218.2KB | |
| Half_Ring_Tab.stl | 1.0MB | |
| Head.stl | 179.8KB | |
| Head_Connector.stl | 155.0KB | |
| Large_Ring.stl | 160.6KB | |
| Ring_Connector.stl | 166.3KB | |
| Small_Ring.stl | 164.5KB | |
| Tail.stl | 199.1KB | |
| Wing.stl | 743.7KB | |
| Wings_Plate.stl | 2.3MB | |
| Wing_Connector.stl | 70.8KB |
