This is my second go at designing a printable trumpet. Unfortunately none of the old pieces will be compatible with the new version aside from the mouthpiece I guess.
I finished this as of 7/14/15. It still doesn't sound great but that's not incredibly surprising. video
What I changed?
I increased the diameter of the tubes especially in the middle bit and made them circles instead of stupid ovals. Should still print fine without supports.
The entire thing should be more printer friendly. Most of the pieces are 5 inches or less with the tallest one being about 5.6 inches. If that is still an issue let me know.
| T2_2ndValveTube.STL | 2.4MB | |
| T2_2ndValveTubeSupported.stl | 2.4MB | |
| T2_bell.1.STL | 2.3MB | |
| T2_bell.1Supported.STL | 14.8MB | |
| T2_bell.2.STL | 327.9KB | |
| T2_bell.3.STL | 257.3KB | |
| T2_bell.4.STL | 248.8KB | |
| T2_bell.5.STL | 4.3MB | |
| T2_bell.5Supported.STL | 4.3MB | |
| T2_bellToValves.STL | 1.7MB | |
| T2_bellToValvesSupported.STL | 2.0MB | |
| T2_lead.1.STL | 103.5KB | |
| T2_lead.2.STL | 364.7KB | |
| T2_lead.3.STL | 112.2KB | |
| T2_lead.4.STL | 4.0MB | |
| T2_lead.4Supported.STL | 4.1MB | |
| T2_leadToValves.STL | 1.5MB | |
| T2_leadToValvesSupported.STL | 1.6MB | |
| T2_valve1.STL | 1.5MB | |
| T2_valve2.STL | 1.5MB | |
| T2_valve3.STL | 2.1MB | |
| T2_valveCap.STL | 81.4KB | |
| T2_valveCapPins.STL | 381.6KB | |
| T2_valveChamber.STL | 4.1MB | |
| T2_valveChamberSupported.STL | 13.5MB | |
| TMPT_mouthpiece.STL | 1.4MB |
