I designed this trumpet to be fully playable but I haven't been able to print the whole thing out out.
| bell.stl | 697.7KB | |
| block.stl | 12.0KB | |
| connector.stl | 684.0B | |
| connector_2.stl | 684.0B | |
| pin.stl | 5.4KB | |
| pin_loop.stl | 47.6KB | |
| pipe_1.stl | 56.7KB | |
| pipe_10.stl | 150.6KB | |
| pipe_2.stl | 63.9KB | |
| pipe_3.stl | 59.0KB | |
| pipe_4.stl | 585.4KB | |
| pipe_5.stl | 377.5KB | |
| pipe_6.stl | 367.8KB | |
| pipe_7.stl | 637.6KB | |
| pipe_8.stl | 115.1KB | |
| pipe_9.stl | 123.3KB | |
| springs.stl | 1.7MB | |
| the_last_part.stl | 255.5KB | |
| trumpet_mouthpiece.stl | 314.8KB | |
| valve_1.stl | 296.4KB | |
| valve_2.stl | 282.1KB | |
| valve_3.stl | 398.4KB | |
| valve_block.stl | 949.0KB | |
| valve_block_top.stl | 48.6KB | |
| valve_lock.stl | 71.3KB |
