Printable (modular) Prusa / REPRAP / 3D-printer Enclosure Frame 3D Printer Model
The file 'Printable (modular) Prusa / REPRAP / 3D-printer Enclosure Frame 3D Printer Model' is (stl) file type, size is 9.0MB.
The file 'Printable (modular) Prusa / REPRAP / 3D-printer Enclosure Frame 3D Printer Model' is (stl) file type, size is 9.0MB.
The standard dimensions are 59x59x60,5cM, big enough for
a Prusa I3. You can expand the dimensions by simpely add some
extra parts in between. You can choose for your self to make the
frame wider, longer or higher.
On the botom of the frame is some free space available to fit in a standard 10x2mm steel or aluminum strip for extra stability.
You only have to add some plates/sheets to finisch the enclosure.
The frame is designed for 4mm acrylic or plastic sheets. You can
glue the fitting sheets into the frame and finish it nicely with the
included strips.
The higlighted red parts are all that you will need to print this frame. Add some extra pieces of A2,B2,C2,E2 or A5 and D3to expand the
dimension of the frame.
Some people had some questions about the plate dimensions needed for this setup. They're as followed:
transparrent plates:
sides: 55x38cm
top: 55x55cm
doors: 27.5x40cm
front: 55x13cm
non transparent plates:
sides: 55x15cm
| A1_b_.stl | 1.4MB | |
| A2_b_.stl | 1.4MB | |
| A3_b_.stl | 1.4MB | |
| A4_b_.stl | 1.4MB | |
| A5_b_.stl | 1.3MB | |
| B1_b_.stl | 2.4MB | |
| B2_b_.stl | 1.3MB | |
| B3_b_.stl | 2.6MB | |
| B4_b_.stl | 1.3MB | |
| C1_b_.stl | 1.3MB | |
| C2_b_.stl | 1.3MB | |
| C3_b_.stl | 1.3MB | |
| D1_b_.stl | 1.4MB | |
| D2_b_.stl | 2.6MB | |
| D3_b_.stl | 1.2MB | |
| E1_b_.stl | 2.6MB | |
| E2_b_.stl | 1.3MB | |
| Hinge_b_.stl | 11.8MB |
