No more work in progress (If you're looking here after 06.10.2022 design might be outdated, look for V4 in the profile).

This place contains V2 and V3 receivers

small preview

Minor changes regarding to furniture can be made

(16.03.2022 finally put gen3 lower here, but really get it from here -> https://cults3d.com/en/3d-model/game/printable-airsoft-ar15-paar15-aeg-body-kit
and get printable selector from here -> https://www.thingiverse.com/thing:4097329)

This project took alot of time and effort.
As name implies This is a body kit for an airsoft AEG AR15, that means you get V2 gearbox, ar15 type hopup assembly, barrel, handguard, stock and pistol grip, put it together and viola you have an airsoft gun. (yes it built so that standard AEG parts are compatible, but you can also print everything)
That also means you can have it customized or in bright colours if you want.
Note that some level of being able to tech is required.

Why on earth you might consider printing this:
A. You live in a country where airsoft supply is bad possibly overpriced and importing is a problem. But you can source gearbox, hopup and some tube for external barrel and have printer around.
B. Just because printing body kit is cheap and in fact it holds up pretty well.
C. Want A super light build low price? That fits.
D. Experimenting.
E. You want to build a gelblaster.

• Now a little bit about the E variant.I recieved a ton of messages regarding building a gelblaster from chinese, unlucky europeans and australians. And frankly I don't know if that can fit my components. No one reached to me and said, hey I just built a gelblaster thanks to your components as of yet.
  If you are really serious about building a gelblaster best thing that you can do is send me it's gearbox and T piece along with barrel... Thanks to your messages I know what that is. =) no, really. Or if you can perfectly draw these in cad. that works too.

Original set of goals:

1 no supports if possible.

2 Lighten the parts and avoid wasting material.

3 parts interchangeability with of the shelf stuff

4 No more than 12 print hours per part

5 220x220x220 build volume

Mostly achived. You don't need supports for: lower, pistol grip, and bunch of smaller parts.

If you decided to give it a go, feedback can really help push it forward, fix possible mistakes and generally make it better, so I humbly welcome you here -> https://discord.gg/DPYEGvH
You also can download and request some files there.

If you want support this project, and have more of my designs like these here

Tips are appreciated of course, but you can also theck cults https://cults3d.com/en/3d-model/game/blank-lower-for-paar15-airsoft-ar15-body-kit or pinshape https://pinshape.com/items/57168-3d-printed-blank-lower-for-paar15-airsoft-ar15-body-kit and get a blank reciever if you want it devoid of letters or to put a custom markings on it. I can do that myself or customize it per request If you reach out to me through discord.

INSTRUCTIONS!

I really need to make a video. Next update will be with stock and vid I guess.
First print lower. Printing orientation for lower receiver is correct, don't touch it, unless you want to rotate it along Z axis. That part requires no supports. I recommend applying some pva (If glass bed is used) and start printing. you don't really need heated bed for this one (implying usage of PLA or PETG). It should take no more than 10.30 hours time to print is mostly dependant on wall thickness (1.2-1.6 recommended) infil can be very low or absent at all.
then print upper. That part will require supports also, rotate it 180* so the face that meets the barrel is on build plate flat. Make sure you are levelled good. If not your barrel and handguard may end up tilted.
After printing the parts clean up areas with overhangs and supports. Depending on brand of your gearbox you may need to sand down protrusion on the back inner face of lower reciever.

List of planned extra parts

3 types of lower reciever 2/3

3 types of pistol grip 2/3

3 types of upper reciever 3/3

3 types of handguards 1/3

cqb stock and standard tube stock 0/2

charging handles 1/?

fire selectors 1/?

barrels 1/?

Wait a bit they will be there eventually.
We don't have thought out stock yet so, at this point try searching one here, if thingiverse search doesn't work visit yeggi.com , don't hesitate to post makes.

This was the first version.

И вот мы внизу. здесь лежат файлы печатного корпуса ар15. Проект по сути допилен, нехватает приклада, если что-то интересует пишите в контактик (ссыль в профиле) или в дискорд. Переводить стену текста сверху не вижу смысла.