Printable Airsoft AR-15 Gen4 (V4, Aka EVO) 3D Printer Model
The file 'Printable Airsoft AR-15 Gen4 (V4, Aka EVO) 3D Printer Model' is (stl) file type, size is 46.1MB.
The file 'Printable Airsoft AR-15 Gen4 (V4, Aka EVO) 3D Printer Model' is (stl) file type, size is 46.1MB.
Newest gen of my printable ar thing. Goal this time around is to achieve the most strength possible and to make printing outer barrel adequate. In other words to make printable airsoft ar15 looking thing that can withstand moderate amount of abuse you'd expect normal airsoft gun will (and then some).
And I happily conclude that that goal is indeed reached. The only weak part this project has is an adjustable stock locking pin, which system I might revise at some point (normal buffer tubes are compatible)
DO NOT BE A HIGH INFIL IDIOT. This needs thicc walls, not infil. Go with at least 4 walls/perimeters. This way you actually achieve structural strength.
To assemble this in it's current form, you'll need:
m6 threaded rod (half a meter will work fine), m6 nuts,
flat head m5x14 screws and square m5 nuts.
For pistol grip you'll need 1 flat head M3x10 (you can go smaller) and a brass m3 heat insert, because I think tap screw m4 pistol grips suck and you should have heat inserts on hand anyway if you print stuff.
2 alternative versions are available on boosty, contains alternatively styled body with dust cover and arp9 magazine compatible lower, get it here -> https://boosty.to/mosesind/posts/6a44d51c-6be6-4817-bc7b-7d85eccdfcb0?share=post_link
This is the way to support me with updating and enhancing this version. I am very much content with how this one turned out. I do not plan for V5, however I want to include things like underbarrel grenade launcher, a DMR stock and such, interest to boosty files will propel me towards doing these faster.
| back_plate.stl | 332.7KB | |
| barrel.stl | 2.8MB | |
| barrel_extention_+50mm.stl | 580.8KB | |
| barrel_mount_no_supports_mod1.stl | 585.0KB | |
| barrel_square_nut_retainer.stl | 109.8KB | |
| beav_tail_pistol_grip.stl | 6.7MB | |
| Beav_tail_pistol_grip_textured.stl | 67.1MB | |
| bottom_rail.stl | 277.1KB | |
| buffer_tube_for_simplified_stock_just_fits_better.stl | 347.0KB | |
| butt_bit4.stl | 74.5KB | |
| butt_bit_1.stl | 33.5KB | |
| butt_bit_2.stl | 429.5KB | |
| butt_bit_3.stl | 47.5KB | |
| enhanced_printability_lower.stl | 2.4MB | |
| extendable_barrel_pt1.stl | 3.1MB | |
| extendable_handguard_base.stl | 1.3MB | |
| extendable_handguard_base_presupported_rails.stl | 1.3MB | |
| extendable_handguard_v2.stl | 1.3MB | |
| extended_very_long_boi.stl | 874.6KB | |
| extension.stl | 834.2KB | |
| flat_bottom_unextended_rail_piece.stl | 309.3KB | |
| front_pin.stl | 156.9KB | |
| front_screw_plug.stl | 308.2KB | |
| gasblock.stl | 135.6KB | |
| Gasblock_extention_piece.stl | 112.4KB | |
| handguard.stl | 1.1MB | |
| handguard_v2.stl | 1.3MB | |
| left_button.stl | 28.5KB | |
| left__right_rail.stl | 276.9KB | |
| Lower_with_working_selector_detents_and_some_texturing.stl | 2.3MB | |
| mag_button1.stl | 144.9KB | |
| mag_button_2.stl | 28.5KB | |
| mag_catch.stl | 191.2KB | |
| mag_release_link.stl | 18.8KB | |
| Mid_barrel_for_12mm_tube.stl | 3.1MB | |
| muzzle_device_p1.stl | 149.6KB | |
| muzzle_device_p1_long.stl | 1.0MB | |
| muzzle_device_p2.stl | 608.0KB | |
| normal_barrel_extention.stl | 610.0KB | |
| normal_pistol_grip.stl | 6.2MB | |
| normal_pistol_grip_texxx.stl | 40.1MB | |
| outer_barrel_short.stl | 1.8MB | |
| pistol_grip_drilling_conductor.stl | 92.3KB | |
| rear_pin_evo.stl | 44.2KB | |
| right_button.stl | 28.5KB | |
| right_selector_plug.stl | 35.1KB | |
| screw.stl | 282.5KB | |
| selector_disc.stl | 58.2KB | |
| selector_lever.stl | 58.3KB | |
| shim_piece.stl | 19.7KB | |
| short_handguard.stl | 933.5KB | |
| short_side_rail.stl | 185.1KB | |
| short_underside_rail.stl | 185.3KB | |
| side_rail_v2.stl | 303.6KB | |
| simplified_buttpad.stl | 394.1KB | |
| simplified_stock_bit.stl | 1.3MB | |
| simplified_stock_latch.stl | 418.9KB | |
| sling_plate.stl | 58.3KB | |
| stock_lever_2.stl | 407.0KB | |
| stock_lever_fixator_2.stl | 86.9KB | |
| stock_lever_pin.stl | 13.1KB | |
| stock_toob.stl | 460.0KB | |
| the_bar.stl | 3.0KB | |
| the_grip_base.stl | 2.9MB | |
| the_stock_fix.stl | 1.8MB | |
| underside_rail_v2.stl | 343.6KB | |
| unextended_rail_piece_no_supports_underside.stl | 322.2KB | |
| unextended_rail_piece_you_need_to_print_this_for_structure.stl | 324.2KB | |
| upper_05.stl | 1.0MB | |
| upper_with_underrail.stl | 1.0MB |
