Presenting the Print3d CNC project. This had taken months of design time to create. Each part has been carefully considered, printed, tested and refined until the optimal result was found.
DOWNLOAD ALL FILES HERE > https://www.dropbox.com/sh/i9m7hytva4a1gia/AAA1xo-YYjykY_M3nFI6vZ0ra?dl=0
DONATION - If you would like to donate any small amount to the creator of these files (me) please us Paypal > https://paypal.me/paulscott69 ..... Thank you :)
The first Print3d CNC has been printed and built and is working well with accurate cuts from good rigidity and precise clearances.
Along with the STL there is a full parts list with links of where to buy the parts required.
Once printed, this is a very easy kit to put together. You can adjust the dimensions of your version of this CNC easily by adding longer / shorter extrusions. Mine uses 60cm for X and Y.
| A_-_y-rail-end-cap4.stl | 30.6KB | |
| B_-_y-rail-end4.stl | 82.5KB | |
| C_-_y-axis-bearing-carrier4.stl | 182.3KB | |
| D_-_y-axis-bearing-carrier-cover-plate2.stl | 103.8KB | |
| E_-_x-y-axis-plate-left.stl | 201.7KB | |
| F_-_x-y-axis-plate-right.stl | 201.7KB | |
| G_-_x-axis-end-plate-stepper-bracket2.stl | 834.4KB | |
| H_-_stepper-drag-chain-bracket-left.stl | 867.7KB | |
| I_-_stepper-drag-chain-bracket-right.stl | 877.8KB | |
| J_-_x-axis-plate-belt-cap2.stl | 34.7KB | |
| K_-_x-axis-bearing-carrier-top2.stl | 148.7KB | |
| L_-_x-axis-bearing-carrier-bottom2.stl | 120.6KB | |
| M_-_z-axis-plate-rear.stl | 103.6KB | |
| N_-_z-axis-stepper-mount-upper.stl | 74.5KB | |
| O_-_z-axis-stepper-mount-lower.stl | 74.1KB | |
| P_-_z-axis-idler-bearing-mount.stl | 46.0KB | |
| Q_-_z-axis-plate-front.stl | 154.6KB | |
| R_-_z-axis-rod-bracket2.stl | 140.9KB | |
| S_-_z-axis-rod-traveller-plate.stl | 704.4KB | |
| T_-_z-axis-router-mount.stl | 947.4KB | |
| U_-_vacuum-bracket-top.stl | 589.2KB | |
| V_-_vacuum-bracket-bottom.stl | 2.1MB | |
| W_-_clamp-holddown-base.stl | 77.3KB | |
| X_-_clamp-holddown-knob.stl | 1.0MB |
