Print PLA With Makerbot Replicator 2x Upgrade 3D Printer Model
The file 'Print PLA With Makerbot Replicator 2x Upgrade 3D Printer Model' is (STL) file type, size is 346.2KB.
The file 'Print PLA With Makerbot Replicator 2x Upgrade 3D Printer Model' is (STL) file type, size is 346.2KB.
Frustrated with 3d prints? Can't print with PLA? At http://3dprintler.com/ we created an upgrade for Makerbot Replicator 2x to print with PLA and ABS. We are off to CES2014 to show it to Makerbot. Currently, there is a big problem with all Makerbot Replicator 2X machines. When you try to print with PLA, the build plate heats up, and the extruded PLA plastic wonstick to it.
We have the solution: a cooling system that directs cooler air down to the build plate.
This Makerbot Replicator 2X upgrade is easy to install and does not hinder your prints in any way. In fact, it only enhances the quality of your 3D prints.
How to install Makerbot Replicator 2x Upgrade to print with PLA:
http://www.youtube.com/watch?v=_aYIsXFaKTs
Here are the parts you need to purchase:
1) Fan 2 per kit -> 11.025/9.891 http://www.digikey.com/product-search/en?vendor=0&keywords=381-1082
2) Female Socket 2 per kit --> 0562/.0543 http://www.digikey.com/product-search/en?vendor=0&keywords=455-2266
3) Male pins 6 per kit-->..0363/.03132 http://www.digikey.com/product-detail/en/SXH-002T-P0.6/455-2261-1-ND/1651059
4) Male Socket 3 per kit --> .0856/.08270 http://www.digikey.com/product-search/en?WT.z_header=search_go&lang=en&site=us&keywords=455-2247&x=0&y=0&formaction=on
You can order complete kit from our website - http://3dprintler.com/product/makerbot-replicator-2x-upgrade-for-pla-prints/
Please send us your comments.
| Duct_Left.STL | 411.5KB | |
| Duct_Right.STL | 411.1KB | |
| Spacer.STL | 16.1KB |
