Print In Place Planter With Drainage And Dish 3D Printer Model
The file 'Print In Place Planter With Drainage And Dish 3D Printer Model' is (stl) file type, size is 719.12 KB.
The file 'Print In Place Planter With Drainage And Dish 3D Printer Model' is (stl) file type, size is 719.12 KB.
A print in place planter/plant pot with drainage and integrated dish. The upper inner radius of the pot planter is approx 100 mm, but the planter is scaleable to a degree.
The cone at the bottom of the planter drains water towards the outside of the bottom radius, where the water drains via many small channels into the dish, where it can evaporate. This design allows the planter to be printed upright as once piece with no supports*.
*I haven't printed this version yet, so you might need supports for the bottom void as I haven't tested this yet. The pictured print is an older, slightly different design.
If you print this instead of buying a planter, please consider sending a tip my way :).
| Planter.STL |
