Print-in-place Clicky Rope Tensioner 3D Printer Model
The file 'Print-in-place Clicky Rope Tensioner 3D Printer Model' is (stl) file type, size is 409.5KB.
The file 'Print-in-place Clicky Rope Tensioner 3D Printer Model' is (stl) file type, size is 409.5KB.
Twist to tighten, push to release, as simple as that.
Also, it's scalable.
Print settings:
0.12 - 0.2mm layer height,
2+ Wall loops,
Aligned seam,
“Precise wall”, “Arc Fitting” on, if available in your slicer.
Filament type doesn't matter much, but i used Pet-G.
Your machine and slicer has to be well calibrated for this model to work properly as it has tight tolerances and fine details in the mechanism.
Please, share your feedback if you liked this model.
| tensioner.stl | 1.1MB |
![Timon [Lion King] 3D Printer Model](https://res.3axis.co/d5198e72-7677-4efb-b76b-4147651e7fcd/images/b60df999-b01c-4211-8da1-3c6facfdd42e_thumb.jpg)
