Print In Place – Cat/Dog Door 3D Printer Model
The file 'Print In Place – Cat/Dog Door 3D Printer Model' is (STL) file type, size is 261.2KB.
The file 'Print In Place – Cat/Dog Door 3D Printer Model' is (STL) file type, size is 261.2KB.
Hello You all!
I'm actually studying at Politecnico di Torino!
!! Your printer should print at least 165x165x100 !!
This is a cat/dog door you can use after drilling your home door or directly when building your pet's house.
Print:
You will also need:
You'll need a hole large at least 140 mm and the wooden board should be 20 mm deep.
I personally used PLA but you can also use ABS or others.
Thanks for downloading!!!
| Complessivo.STL | 694.3KB | |
| Stop.STL | 66.1KB |
