Print-in-place And Articulated F14 Jet Fighter With Improved Wingdesign 3D Printer Model
The file 'Print-in-place And Articulated F14 Jet Fighter With Improved Wingdesign 3D Printer Model' is (stl) file type, size is 27.8MB.
The file 'Print-in-place And Articulated F14 Jet Fighter With Improved Wingdesign 3D Printer Model' is (stl) file type, size is 27.8MB.
Projectvideo: https://youtu.be/SNWnS3XnjX8
*edit 10.24.21
Added a tiny version (100), keep in mind it is a challenging print and requires a well calibrated printer, good filament and finetuned profile
*edit 10.23.21
Added articulated eggs for this version of the Jet Fighter
*edit 10.07.21
added a large version (300). If you want to print the stands for it you have to upscale the stands to 150%
I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of with a satisfying snap and leaves a nice clean edge. I have also adjusted the wing shape and the angle of the tail fins. I have also included a version with a brim
If you want the stand for this model you can download it here:
https://www.thingiverse.com/thing:4800112
Subscribe or follow me on:
Subscribe or follow me on:
Instagram: www.instagram.com/agepbiz
YouTube: www.youtube.com/user/agepbiz
Twitter: www.twitter.com/agepbiz
Printsettings:
No support
No raft
0,15mm-0,2mm layer height
35-45mm/s
WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.
| egg_100_breakaway_smooth.stl | 8.1MB | |
| egg_200_breakaway_smooth.stl | 8.1MB | |
| egg_300_breakaway_smooth.stl | 8.1MB | |
| jet_fighter_100_breakaway_smooth_brim.stl | 4.2MB | |
| jet_fighter_200_breakaway_smooth.stl | 14.3MB | |
| jet_fighter_200_breakaway_smooth_brim.stl | 14.3MB | |
| jet_fighter_300_breakaway_smooth_brim.stl | 14.3MB |
