A 675 mm x 514mm x 342 mm castle
2600 gr of PLA pink and fuchsia
more than 110 hours of printing time
Created in sketchup using diferent sources and cutted into 9 pieces of maximum size of printer
| Completo_fixed.stl | 7.1MB | |
| Fucsia_10_ventanas_x2_1.stl | 15.9KB | |
| Fucsia_11_ventanas2_x4.stl | 11.0KB | |
| Fucsia_12_escudo_entrada_1.stl | 13.4KB | |
| fucsia_1_chimenea_1.stl | 553.3KB | |
| Fucsia_2_Torre_muralla_1_x_4.stl | 62.4KB | |
| Fucsia_3_Torre_muralla_puerta_y_peques_1.stl | 86.5KB | |
| Fucsia_4_Tejados_primera_planta_1.stl | 14.5KB | |
| Fucsia_5_Tejados_tercera_planta_peques__x4.stl | 2.8KB | |
| Fucsia_6_Tejados_tercera_planta_cruz_grande.stl | 227.9KB | |
| Fucsia_7_Tejados_tercera_planta_sueltos.stl | 157.2KB | |
| Fucsia_8_Tejados_torres_tercera_planta_1.stl | 69.0KB | |
| Fucsia_9_adornos.stl | 588.4KB | |
| P1C1_fixed.stl | 265.0KB | |
| P1C2_fixed.stl | 760.3KB | |
| P1L1_fixed.stl | 554.1KB | |
| P1L2_fixed.stl | 383.5KB | |
| P1R1_fixed.stl | 512.5KB | |
| P1R2_fixed.stl | 384.6KB | |
| P2L.stl | 262.4KB | |
| P2R_fixed.stl | 437.2KB | |
| P3_suelo.stl | 333.1KB | |
| P3_Torre1.stl | 93.6KB | |
| P3_Torre2_fixed.stl | 647.8KB | |
| P3_Torre3.stl | 63.9KB | |
| P3_Torre4_fixed.stl | 1.3MB |
