Prince Wednesday’s Castle Playset 3D Printer Model Free Download

Description Files (20)

Summary

My daughter is obsessed with Daniel Tiger, the PBS show, and one of her favorite characters is Prince Wednesday. There is no playset you can purchase of his castle, so I created a castle playset that is inspired by the facade on the show. It is hardly a replica, but it'll tide her over until they make one I can buy!

I have an old Printrbot JR so I needed it to be able to fit on a 150x150 print bed... so, some assembly required to fit the pieces together!!!

Update 1/8: I added two covers for the bottom towers so if you are printing the roofs in different colors than the walls, you can have a bit o' visual uniformity. I also updated the spacerconnector file to fit better.

Update 1/11: I've added a 2nd version of the top left tower and some "little clippy things" if you want to clip it to the back of the roof... if you don't want your tower permanently glued or just sitting on the top, here's a solution! Top right tower to come later this week.

I've got my roofs printed, and I'm waiting for blue filament (it'll be way too blue, but it'll have to work) in the mail to do the full assembly.

If you want a big neighborhood trolley, go here:
http://www.thingiverse.com/thing:630018

bottom_center_wall.stl	293.1KB
bottom_left_tower.stl	306.7KB
bottom_left_tower_cover.stl	16.9KB
bottom_left_wall.stl	264.6KB
bottom_right_tower.stl	186.1KB
bottom_right_tower_cover.stl	13.6KB
bottom_right_tower_fixed.stl	195.6KB
bottom_right_wall_fixed.stl	199.0KB
castle_assembled.stl	2.4MB
castle_assembled_1-8-15.stl	2.4MB
ladder.stl	23.7KB
little_clippy_things_tl.stl	6.3KB
spacerconnector__2_.stl	9.5KB
top_center_roof.stl	16.9KB
top_left_roof.stl	17.6KB
top_left_tower.stl	475.1KB
top_left_tower_v2.stl	479.8KB
top_right_roof.stl	28.5KB
top_right_tower.stl	540.6KB
tower_spacer.stl	47.6KB

Prince Wednesday’s Castle Playset 3D Printer Model

Summary

Tags

You might also like