Primos Trigger Stick Gen3 Leg Extension 3D Printer Model
The file 'Primos Trigger Stick Gen3 Leg Extension 3D Printer Model' is (stl) file type, size is 41.8KB.
The file 'Primos Trigger Stick Gen3 Leg Extension 3D Printer Model' is (stl) file type, size is 41.8KB.
The largest Primos Trigger Stick is too short for me at 1.90m body lenght, so that I can't set up well on slopes. Extending the legs would be the worst option, I thought at first, but it has turned out to be the most stable so far. Thanks to the construction method of the sticks, everyone else still can use the pod.
I made mine glow-in-the-dark, cause I stept quite a few times on it in the dark resulting in noise. -_-'
Once you have printed the extensions, wrap some tape over the aluminium barrel for a better hold. The rubber feet/tips fit just fine.
I printed walls at 1.5mm and 20% gyroid or cubic filling.
You will need Brims! (30mm worked fine for me).
Happy printing/hunting!
| Primos_Trigger_Stick_Gen3_Leg_Extension1.stl | 138.3KB |
