Powered Hit And Miss Engine Kit 3D Printer Model
The file 'Powered Hit And Miss Engine Kit 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'Powered Hit And Miss Engine Kit 3D Printer Model' is (stl) file type, size is 1.3MB.
As I finished modeling the Fairbanks-Morse hit and miss engine, http://www.thingiverse.com/thing:113398, I kept thinking it should be running. The 1/16 scale model is surely big enough to house a small electric motor and a battery pack. So back to the drawing board (or is that the “CAD Pad�)
See it run at: http://youtu.be/0-gTHz5ukeY
Well, it is still a tight fit. The motor must be mounted normal to the flywheel axis. So we need bevel gears to couple the motor with the flywheel. I hollowed out the gear box, and gave it a separate, glue on cover. Separated the base and found room to install the switch and battery back. Now the engine is just looking for something neat to power!!!
| axel.stl | 24.9KB | |
| base.stl | 114.6KB | |
| Big_gear.stl | 52.4KB | |
| Flywheelpower.stl | 207.5KB | |
| Flywheelright.stl | 217.5KB | |
| FM_Motorizedtop.stl | 7.1KB | |
| FM_Motorizedtopped.stl | 1.1MB | |
| gear5.stl | 50.5KB | |
| pipe.stl | 1.2MB | |
| watertank2.stl | 255.7KB |
