Powered Cart Hub 13inch 3D Printer Model
The file 'Powered Cart Hub 13inch 3D Printer Model' is (stl) file type, size is 2.6MB.
The file 'Powered Cart Hub 13inch 3D Printer Model' is (stl) file type, size is 2.6MB.
This wheel hub is redesigned to fit a 13 inch wheel lawn or garden dump cart. It is so you can power your own Gorilla Cart if your older like myself and live on a bit of a hill side. It uses toy car Gear hub and motors that you can buy on Aili Express or Amazon, front frame will require some cutting and welding.
The switch box goes into the handle with a double pole double throw switch for forward and reverse. It uses two R/C planetary gear heads mounted to the 550 motor that cut the speed by 1/3 to walking speeds and increase the torque. Also used was as a 30amp pulse width modulated speed controller. If your battery packs are above 24volts to 48 volts you'll need a 30 amp DC to DC converter so that batteries above 24 volts up to 48 volts could be used to run the 24 volt motors. All parts are purchased on Amazon or one of the slow boat from China sights.
| Dump_Cart_Wheel_Hub.stl | 198.1KB | |
| Handle_Switch_Box.stl | 9.2MB | |
| Pull_string_assembly_Dump_cart.stl | 70.9KB | |
| Spline_Pot_Shaft_pully_knob.stl | 206.0KB |
![Specimens With Gauge Length Five Times The Diameter [E8M] 3D Printer Model](https://cdn.3axis.co/assets/ae/bc/cf/35/aebccf35-03cd-4da1-992f-62420a3495a2/images/75f1d63f-1551-4a64-a171-fb8c6ea0e55e_thumb.jpg)
