I had an extra stack of powerblock weights with no handle so I did some measurements with my existing powerblocks to make myself a third handle.

You need two Powerblock Blocks (1 for each side) and two of the Selector Pin pieces (I need to verify what screw I used to hold the pins together.

I had to measure the distance needed between the blocks to cut 5x sticks of PVC piping for the structure and handle itself.

DO NOT use this as you would the original handle as it is still a 3D printed piece but it can be useful for exercises such as bent over rows and sumo squats where you are not holding it over another body part.