Powerbank DIY 12000-16000 MAh 2.1A 3D Printer Model
The file 'Powerbank DIY 12000-16000 MAh 2.1A 3D Printer Model' is (stl) file type, size is 11.5MB.
The file 'Powerbank DIY 12000-16000 MAh 2.1A 3D Printer Model' is (stl) file type, size is 11.5MB.
I made a powerbank for 18650 batteries, 4 of them. Please enjoy, there is a youtube video for the assambley (PART 2). There are three different lids for it, if you wish to replace it after a while of use.
Its 2.1A USB pcb-board so you can charge an ipad without problems.
You can buy the parts for the powerbank here:
USB-PCBboard
Battery-holder
Battery 4000 mAh
Battery 3000 mAh
Please check out and subscribe on my youtube-channel
If you like what I do consider leaving a small tip to support me for more designs, thank you :)
| bottom.v2.stl | 654.6KB | |
| button.stl | 99.2KB | |
| lid.stl | 195.2KB | |
| lid2.stl | 14.9MB | |
| lid3.stl | 24.6MB | |
| lid4.stl | 10.4MB |
