Powerbank 20000 MAh – 21700. Power 22,5w 3D Printer Model

Author: @
License: CC BY
File formats: stl
Download type: zip
Size:128.5KB

The file 'Powerbank 20000 MAh – 21700. Power 22,5w 3D Printer Model' is (stl) file type, size is 128.5KB.

Summary

Part list:

powerbank modul SW6208 (power rating of 22.5W)
4 INR21700 (4x5000 mAh)
2 screws M2x10 (for housing)
3 screws M2x5
silicone cable AWG18
silicone glue
Advice:

Fix the module board screws M2x5
Fix the housing with screws M2x10
Fix the battery with glue to the body of the powerbank
Characteristics powerbank modul SW6208 :

Switch charging
Current up to 5A, efficiency up to 95%
Support for JEITA specifications
Supports 4.2/4.35/4.4/4.5V battery types
Support temperature loop control
Synchronous boost output power up to 22.5W, with an efficiency of up to 95%
Supports wireless charging mode
Automatic load detection/light load detection
Supports low current modeĀ·
Output fast charging protocol
Supports PPS/PD3.0/PD2.0
Support AFC, support QC4+/QC4/QC3.0/QC2.0
Supports FCP
Support SCP
Supports SFCP
Supports FCP
Supports PE2.0/PE1.1

cup21700.stl 260.7KB
housing21700.stl 279.0KB