March 14th 2018 update, Happy Pi Day. I added an updated version of the power supply cover for those of you with smaller power supplies on this printer. Huge thanks to Chaosmachine420 for providing the measurements from his power supply. I haven't printed it personally, but he's tried printing it and said it all lines up perfectly

Power Supply Cover for the Zonestar P802QR2 Dual Extruder 3D Printer. This is pretty much a necessity for this printer. There may be other Covers that will fit, but I made this one specifically for the P802QR2.

Check out my Build and first impressions video where I talk about why this is necessary here: https://www.youtube.com/watch?v=G4QIKGoLYi0
Also I made a review video for this printer earlier:
https://www.youtube.com/watch?v=wgiKoifPrPI

Print with the first layer height as 0.2mm so that you'll get the cool squares bridging effect on the bottom like you see on several of the parts on the Prusa i3 MK2S

Edit: 12/30/17 @ 5:54 PM CST - I updated the stl file because the hole for the plug/switch was causing problems with trying to plug in the power cord.

Edit: 12/31/17 @ 10:26 AM CST - I updated to two different stl files. one version has a hole that should allow you to route the z axis stepper motor wire through the Power supply cover, and the other version has a big enough recess so you should be able to slide the power supply cover into place after you've plugged in the stepper motor without having to bend the wires. Note, I haven't tried printing either of these yet, but they should both work fine.