This is a power supply cover for use with my Voxel Ox 8" 3D Printer.
It is designed to fit a 12V 30A power supply as sold by OpenBuilds. Other models will probably fit but can't guarantee screw holes will be in exact same position.
Mounts securely to PSU with 4 x M4 6mm length.
Makes use of switched and fused power inlet module with C14 power cord socket.
Can be found on amazon or ebay.
ex: http://www.amazon.com/Inlet-Power-Socket-Switch-IEC320/dp/B00511QVVK/
18AWG stranded wires are soldered and heat shrunk onto the power inlet module as pictured and have crimped spade connectors for proper attachment to power supply input terminals.
Power supply output is for connecting to a RAMPS board. The wire is jacketed 4 conductor 16AWG wire. For strain relief I use Heyco "RDD 101" Mfg #1852 locking strain relief bushing. http://www.mouser.com/Search/ProductDetail.aspx?R=1852
The use of crimped insulated ferrules allows for a solid connection between the RAMPS screw down terminals and the 16AWG stranded wire. Inside the PSU Cover side all 4 wires have crimped spades as well for secure connection to the power supply terminals.
Works great in conjunction with my PSU Bracket for 2020 Aluminum Extrusion
http://www.thingiverse.com/thing:1091724
| PSU_Cover.f3d | 1.9MB | |
| PSU_Cover_v2.stl | 402.6KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
