Power Supply Box 3D Printer Model
The file 'Power Supply Box 3D Printer Model' is (stl) file type, size is 40.3KB.
The file 'Power Supply Box 3D Printer Model' is (stl) file type, size is 40.3KB.
I have made a Power Supply Box which should fit a 5v / 5A Power Supply from Aliexpress.
The Lid to this box is 0.05 mm bigger than the box, so you need to use a hobby file tool to make it fit on all 4 sides (I like the Lid to be as tight as possible, so that's why it's like that)
Measurements are: 85 x 120 x 43 (85 x 120 x 45 without the Lid attached)
As u have noticed, there is a "notch" on the box back side - Use a small flat screwdriver to pop up the lid if needed.
| PowerSupply_-_5V_5A_-_Aliexpress-Box.stl | 33.3KB | |
| PowerSupply_-_5V_5A_-_Aliexpress-Lid.stl | 172.3KB |
![[HSW] PowerStrip Holder 3D Printer Model](https://cdn.3axis.co/assets/86/0a/bb/5a/860abb5a-2bad-421f-ab17-a7d01f7902a7/images/6a3c27d1-4c25-482b-8eab-0b442f98599c_thumb.jpg)
