Powder Deflector (Recargamatic, Dillon, Lee Precision, Redding, Hornady) 3D Printer Model
The file 'Powder Deflector (Recargamatic, Dillon, Lee Precision, Redding, Hornady) 3D Printer Model' is (stl) file type, size is 8.3MB.
The file 'Powder Deflector (Recargamatic, Dillon, Lee Precision, Redding, Hornady) 3D Printer Model' is (stl) file type, size is 8.3MB.
Powder deflector for Recargamatic, Dillon, Lee Precision, Redding, Hornady.
50mm base measurement (check the internal measurement of the powder meter tube for a perfect fit.
Height is 48mm.
The deflector is 50mm at the bottom to go inside the tube and the height is 48mm.
NOTE: Avoid being surprised during your recharging, with the powder meter deflector your refill becomes more accurate and stable, avoiding the pressure influence that the weight of the amount of powder inside your powder meter makes on the doser compartment drawer, equalizing its recharging and avoiding variations as it stabilizes the pressure below the deflector.
Easy to install, just fit. Place inside the powder compartment as pictured.
It doesn't have that kind of baffle across the thingverse.
NOTE²: For other measurements, edit your slicer correctly using a caliper from your gunpowder tube before printing.
Update 06/04/2022
Updated version of Polvorimetro making it lighter, with the exact size on each side, it was repackaged again from scratch.
Feel free to download version v2.
Created by Tinkercad.
Files:
Power deflector.stl
Powder_Deflector_V2.stl
| Powder_deflector.stl | 12.5MB | |
| Powder_Deflector_V2.stl | 5.5MB |
