Pottery Tools Trimming Chucks 3D Printer Model
The file 'Pottery Tools Trimming Chucks 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'Pottery Tools Trimming Chucks 3D Printer Model' is (stl) file type, size is 1.3MB.
I wanted to design an accessible set of chucks for trimming pottery. This version has a detached base so you can easily swap out chucks.
I have not personally printed these. If you print them and they need adjusting, please let me know!
The bat pin holes are 10" and 6" on center.
Dimensions for the chucks:
Height Width
Small 110mm 120mm
Med 140mm 150mm
Large 170mm 180mm
Tall 200mm 125mm
Cup 120mm 100mm
I did not include the bowl chuck with this set. Due to the size, you'd be better off printing the bowl chuck with the attached base. It's available here: https://www.thingiverse.com/thing:6835343
*11/18 I have reformatted and uploaded a new version of these. The bat pin holes are slightly larger and the tolerance between the chucks and the base has been increased so they should fit together better. Thanks to those that have given feedback!
| Chuck_Base_Insert_v2.stl | 159.1KB | |
| Chuck_Base_v2.stl | 293.8KB | |
| Cup_Chuck_DB_v2.stl | 301.2KB | |
| DB_Chuck_Set_v2.stl | 2.0MB | |
| Lg_Chuck_DB_v2.stl | 334.0KB | |
| Md_Chuck_DB_v2.stl | 303.1KB | |
| Sm_Chuck_DB_v2.stl | 304.1KB | |
| Tall_Chuck_DB_v2.stl | 345.4KB |
