Potentiometer Cam 3D Printer Model
The file 'Potentiometer Cam 3D Printer Model' is (stl) file type, size is 4.8KB.
The file 'Potentiometer Cam 3D Printer Model' is (stl) file type, size is 4.8KB.
Cam for attaching a potentiometer to another moving arm. Designed for use in https://www.thingiverse.com/thing:4863621, saving on two potentiometer mounting hubs that would otherwise cost an additional $11.
Print with holes vertical to prevent warping when printing. Most slicers allow re-scaling so you can change the width, otherwise you can import it into a 3d editor such as Blender to change the width. This part was designed for a 6mm knurled (and slotted) potentiometer and a M2.5 screw as a hinge with a 12mm radius. A new radius may require a new model. I would be happy for someone who knows OpenSCAD to make a procedural version of this to make it easier to customize.
One last thing: I had a problem with my first print of this coming off the bed on my MK4 printbed. I don't know if it was dirty or not, but you may want to use a brim, unless you want to see if you can avoid it. You can probably leave it out though because it only came off near the end anyway.
| pot-cam.stl | 19.4KB |
