Post-It Companion Cube 3D Printer Model
The file 'Post-It Companion Cube 3D Printer Model' is (STL) file type, size is 156.6KB.
The file 'Post-It Companion Cube 3D Printer Model' is (STL) file type, size is 156.6KB.
Thank you to @Poh for his model http://www.thingiverse.com/thing:33138
Thank you to @Archimiedies for cube printability design inspiration http://www.thingiverse.com/thing:137623
Standard 3"x3" Post-It note holder. The hearts and bars are designed to fit with slight clearance and be glued into the cube.
The hearts printed out and snapped into the cube, the bars were not quite staying in so I glued them in place.
Print:
MUST MOVE/DUPLICATE OBJECTS, they are in a single file with single copy of each, use your slicer to separate and print the following quantities. Orientation also should be changed/considered based on your type of printer.
1x - Cube
4x - Hearts
16x - Bars
Need:
Super glue
| Post-It_Companion_Cube__REV1.STL | 473.2KB |
