Portland Trail Blazers Poker Card Capper 3D Printer Model
The file 'Portland Trail Blazers Poker Card Capper 3D Printer Model' is (stl) file type, size is 95.2KB.
The file 'Portland Trail Blazers Poker Card Capper 3D Printer Model' is (stl) file type, size is 95.2KB.
--- Description ---
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly on your chips when not in use.
This design is the Portland Trail Blazers logo that was updated in 2017.
If you like this you may want to checkout my collection of card cappers
--- Printing ---
1) Print the logo file twice. Make sure you print it with the tabs up.
2) I printed the holder (upside down) and base with line support material spaced at 4.5mm.
--- Assembly ---
1) The holder is designed to have 4 nickels placed inside of it as ballast prior to assembly.
2) The four pieces will slide/snap together.
3) Put a little adhesive in the slots in the base before pressing the two logo pieces into the base. The holder should snap in and stay, but I use a little adhesive just to make sure.
Enjoy and if you print one please post a picture!
| base_port_tb_card_capper_it3.stl | 561.3KB | |
| holder_card_capper_4_ni_it3.stl | 373.9KB | |
| trail_blazers_logo.stl | 249.6KB |
