Portable Rolling Station 3D Printer Model
The file 'Portable Rolling Station 3D Printer Model' is (stl) file type, size is 1.1MB.
The file 'Portable Rolling Station 3D Printer Model' is (stl) file type, size is 1.1MB.
Smoking Rolling Station - EXTRA portable - NO SUPPORT (15 x 17 x 8 cm)
Lid can be used as a rolling tray. Inside there are two containers with lids (one for material and one for tobacco), two shallow holes for king size paper, one shallow hole for a paper roll with filters, one compartment for a grinder, one small compartment for anything, a scrapper, a poker, a material saver (check link further below), a space for a big Clipper lighter, a keychain cone maker and an all-in-one keef scooper/bowl cleaner.
To make the tray smooth and easier to scoop the material, use Ironing Mode in Ultimaker Cura
Ironing Mode Settings:
Pattern: ZigZag
Line Spacing: 0.2
Flow: 25%
Inset: 0.2
Speed: 100 mm/s
Inspired by: https://imgur.com/gallery/qZIgE
Keef shovel from: https://www.thingiverse.com/thing:1968807
Cone maker from: https://www.thingiverse.com/thing:2794024
Printing:
Quality: 0.1
Infill: Grid, 20% - (except the keychain cone maker - 100%)
Adhesion: No
Support: No
Printer: Ender 3 Pro
| box.stl | 1.0MB | |
| cone_maker_keychain.stl | 17.8KB | |
| container_box_1.stl | 457.2KB | |
| container_box_2.stl | 457.2KB | |
| container_cap_1.stl | 127.5KB | |
| container_cap_2.stl | 127.6KB | |
| keef_bowl.stl | 39.3KB | |
| material_saver.stl | 295.7KB | |
| poker.stl | 7.3KB | |
| scrapper.stl | 34.4KB | |
| tray.stl | 307.0KB |
