Portable Monitor 3D Printer Model Free Download

Description Files (13)

Summary

Hello,

Here is the portable monitor made of laptop display.
To make it working you need:

laptop display, 15.6 inch, eDP 30 pin, FullHD (for my model see the photo)
DP to eDP converter (photo),
https://www.aliexpress.com/item/1005006283043503.html
eDP 30 pin connector tape, in my case it was a "reverse direction cable" (photo, marked one)
https://www.aliexpress.com/item/1005005445845097.html
USB-C to DisplayPort converter (photo),
https://www.aliexpress.com/item/1005006532779571.html
22 x M2.5 screws, threat around 3mm long, cone-like head
4 x M2.5 cross-head screws (to attach the enclosure for the converter circuit),
4 x M2 screws, 10mm long entirely, to attach the converter circuit to the enclosure
4 x M2 nuts (same purpose as above)
26 insert nuts, M2.5, 3mm long
plexiglass, 234x366 mm, 2mm thick (thus can be cut by wallpaper knife; can be thicker, but cutting will be therefore more difficult)
black tape (additionally, to hide imperfection of the print-out).

UPDATE:

I have designed a stand.
I have added Aliexpress links to the components I have used.

To assemble the stand you additionaly need:

4 x M3 20...25 mm long screws
4x M3 insert nuts
2-side sticky tape

The whole frame can be printed at once as the parts fit the table after arrangement. I recommend to carefully adjust 3D printed parts to match the plexiglass and the display for avoiding gaps.

To cover the imperfections of the print-out I covered the front side of the printout using the black sticky tape.

To be be done:

the front cover (to avoid scratches of the display when put into the bag).

matryca-obudowa_2obudowa_2_dol.stl	74.9KB
matryca-obudowa_2obudowa_2_dol_lewo.stl	82.1KB
matryca-obudowa_2obudowa_2_dol_prawo.stl	82.1KB
matryca-obudowa_2obudowa_2_gora.stl	74.9KB
matryca-obudowa_2obudowa_2_gora_lewo.stl	81.7KB
matryca-obudowa_2obudowa_2_gora_prawo.stl	81.7KB
matryca-obudowa_2obudowa_2_lewo.stl	50.3KB
matryca-obudowa_2obudowa_2_prawo.stl	50.3KB
matryca-obudowa_elektronika.stl	722.2KB
matryca-stand001mocowanie.stl	76.6KB
matryca-stand001pałąk.stl	81.1KB
matryca-stand001podstawa.stl	89.1KB
matryca.FCStd	888.2KB

Portable Monitor 3D Printer Model

Summary

Tags

You might also like