The file 'Portable Bidet Ø21mm (Remix) 3D Printer Model' is (stl) file type, size is 84.7KB.
Remix of a design made by RunningUtes
The original design came out of the printer featuring a Ø18.8 mm insert, which was too small for the bottles found here locally, the insert size was adjusted to be 1.14x wider, making it loosely fit a bottle mouth with Ø21.4 mm inner diameter. Will require O-rings to fit and seal properly. Makeshift seals can be made from bike inner tubes, hotglue or rubber bands.
O-rings of the original design omitted from this remix.
Something to note: if the original was too small, just drill a matching hole on a bottle cap and super-/hotglue the bidet on it, making the bidet a threaded one that fits all the bottles with similar threads.
Print related stuff:
Print time: 59 minutes
Filament used: 5.52 meters of PLA
Estimated material cost (PLA): ~0.50 €
(Calculated from 200 m spool with a price of 17,99 € ≈ 0.08995 / m)
Portable_BidetTweak.stl | 358.0KB |