Pool Fence Extenders and Spacer.
I Came up with this design when shovelling dirt under my pool fence to meet the new regulations set out by my lovely Government.
I thought there has to be an easier way.
The regulations stated that the fence had to be under 140mm from the ground at all places.
I made the design with a hole in the middle to insert a metal rod( 8mm-8.2mm) for extra strength.
I have made multiple lengths up to 100mm.
Insert the assembled extender up the bottom of the vertical posts with a heap of silicone.
I also made a 8mm spacer for a side fence that was coming away from the post due to the movement of the boundary fence.
I passed regulations and the printer has saved me time and money on repairs.
Cheers.
| 100mm_insert.stl | 856.6KB | |
| 30mm_insert_wider_hole.stl | 723.9KB | |
| 40mm_Insert_wider_hole.stl | 722.8KB | |
| 40mm_pool_fence_ext.stl | 1.2MB | |
| 60mm_Insert_wider_hole.stl | 775.1KB | |
| 80mm_insert.stl | 820.5KB | |
| 8mm_pool_fence_mount_bracket_spacer.stl | 248.4KB | |
| pool_fence_post_insert_3.stl | 5.5MB |
