Pool Cue Jig 3D Printer Model
The file 'Pool Cue Jig 3D Printer Model' is (scad,stl) file type, size is 28.3KB.
The file 'Pool Cue Jig 3D Printer Model' is (scad,stl) file type, size is 28.3KB.
This is a set of jigs that can be used when repairing pool cues. I use these to repair older cues that I still value that might have developed a slight warp or need other repairs.
Each block of the jig has a different size hole (12mm to 30mm) so it can be placed at a different position along the cue shaft as needed for the specific taper of a given pool cue. Holes are provided that would allow the cue to be securely fastened by clamps or screws to a surface or allow hanging weights to be attached.
The STL files provided each have have two jig blocks. The OpenSCAD file is provided.
| cue_jig.scad | 671.0B | |
| cue_jig12-13.stl | 22.3KB | |
| cue_jig125-17.stl | 23.7KB | |
| cue_jig14-16.stl | 23.9KB | |
| cue_jig15-18.stl | 24.9KB | |
| cue_jig20-22.stl | 26.3KB | |
| cue_jig25-30.stl | 29.2KB |
