This is a remix of Kelly Egan's PonyTrope in a more traditional zoetrope style. No strobe or motor needed!
Hardware:
48x socket head M4 x 20mm screws (https://www.mcmaster.com/#91292a121/=17d7b1n)
24 M4 nuts (https://www.mcmaster.com/#90592a011/=17dc527)
2x 608 skateboard bearings (https://www.mcmaster.com/#5972k501/=17d7c2e)
Black cardstock
Supports: The base has a support designed in. Remove the support to insert lower bearing. Riser_x12.stl will need a support from your slicer.
Horse .stl files can be found on Kelly Egan's Ponytrope:
| Base_x1.stl | 17.8MB | |
| Bracket_x12.stl | 1.0MB | |
| Hub_Top_x1.stl | 26.8MB | |
| Hub_x1.stl | 31.0MB | |
| Riser_x12.stl | 3.5MB | |
| Spoke_x12.stl | 3.5MB |
