I got this ide when i was printing a flower pot that failed, and i liked the form of it and have used that as a tray.
But then i wanted the possibility to stack them, and organize the trays. And with that i got the idea to organize them with the help of magnets to chain them together.
I made them stackable by reducing the size of the bottom to create a notch. Was thinking of expanding the top of the tray instead but then it would create problems if you mix magnet trays and non magnet trays, by have a notch at the bottom, all the versions can be stacked.
Size of the tray: 100mmX100mmx32mm (wide X long X tall), 30mm inside (without the notch)
Size of Magnet recess: 10mmX2mm
Print time V2PolygonStackBoxBasic: I use a 0,8mm nozzle, 20% infill and no supports and it took 1h 46m
| PolygonStackBox10x2Magnets.stl | 11.2KB | |
| PolygonStackBox10x2MagnetsHalf.stl | 12.0KB | |
| PolygonStackBoxBasic.stl | 3.4KB | |
| PolygonStackBoxBasicHalf.stl | 4.2KB | |
| StackBox10x2MagnetsAllSides.stl | 32.9KB | |
| V2PolygonStackBoxBasic.stl | 3.6KB | |
| V2PolygonStackBoxBasic10x2Magnets.stl | 14.5KB | |
| V2PolygonStackBoxBasic10x2MagnetsHalf.stl | 16.1KB | |
| V2PolygonStackBoxBasicHalf.stl | 5.2KB |
