Pololu Mini Maestro Enclosure For EEZYbotARM 3D Printer Model
The file 'Pololu Mini Maestro Enclosure For EEZYbotARM 3D Printer Model' is (stl) file type, size is 27.1KB.
The file 'Pololu Mini Maestro Enclosure For EEZYbotARM 3D Printer Model' is (stl) file type, size is 27.1KB.
Here's an enclosure I whipped up to house the Pololu Maestro Servo Control Board called out in the EEZYbotARM instructable.
I made the walls thin as to not interfere with the mechanics. I also included a couple of spacers if the screws on hand don't fit the depth of the enclosure. With the spacers, up to a 7mm screw can be used. I wound up repurposing the servo control horn screws that were left over.
The enclosure pictured is friction welded at the 3 points of contact with the base support (2 corner bottom, and top center).
Enjoy!
| Maestro_Enclosure.stl | 512.9KB | |
| Maestro_Lid.stl | 14.1KB |
