Pollinator For Fruit Tree Flowers 3D Printer Model
The file 'Pollinator For Fruit Tree Flowers 3D Printer Model' is (stl) file type, size is 390.6KB.
The file 'Pollinator For Fruit Tree Flowers 3D Printer Model' is (stl) file type, size is 390.6KB.
This is a pollinator apparatus designed to be attached to a blood pressure latex pump. (check amazon)
It features a print in place cap with friction clip design.
Usage: Put pollen into the funnel and squeeze pump to eject pollen onto flower stigma.
Measures roughly 10cm x 6.5cm.
I suggest you print the "brim" version as I've placed 3 small pre-placed brims of 0.2mm height to prevent curling on the fragile tube ends. I've included the non-brim version if you so chose to add brims or other additions yourself. I do not suggest you print without brim, though.
NOTE: Print with caution! While all my prints come out great on my Prusa i3 MK3S+, I'm not responsible for failed prints due to your printer's calibration. Depending on your printer's calibration, the hinge may be a bit tight (0.3mm tolerance) and may break the internal hinge when first attempting to move it.
UPDATE:
8/22/2021
| Pollinator_V2.stl | 449.4KB | |
| Pollinator_V2_brim.stl | 456.2KB |
