Polaroid Pack Camera Reversal Kit 3D Printer Model
The file 'Polaroid Pack Camera Reversal Kit 3D Printer Model' is (stl) file type, size is 688.3KB.
The file 'Polaroid Pack Camera Reversal Kit 3D Printer Model' is (stl) file type, size is 688.3KB.
This kit installs over the viewfinder and onto the lens/electric eye to reverse the image being taken. Use when doing direct to film images or when using Polaroid i-type film. The viewfinder attachment only works with the Zeiss Ikon combined viewfinder/rangefinder.
Print both pieces using supports, and cut 2 mirrors: 80mm x 55mm for the viewfinder and 80mm x 84mm for the lens body. Glue the mirrors onto the 45 degree surfaces.
To use, mount the viewfinder attachment until it clicks into place. Carefully push on the lens attachment making sure it's seated completely. Composing the picture is a little tricky as movements for framing are reversed. The rangefinder works normally.
To shoot Polaroid i-type film, orient the camera so the right side is pointing up and shoot 90 degrees.
To shoot landscape paper negative reversals, orient the camera down like you are using a TLR (twin lens reflex). An arca tripod mount is provided for this purpose.
| Polaroid_pack_reversal_ARCA_tripod_mount.stl | 1.2MB | |
| Polaroid_pack_reversal_lens_body.stl | 278.9KB | |
| Polaroid_pack_reversal_viewfinder.stl | 199.0KB |
