Tablet mount for the driver side roof of my Polaris RZR Pro XP. The bolt pattern should fit any Ram mount that uses the ARMS bolt pattern. My machine has the factory plastic roof and unknown brand windshield. It may or may not work with other roofs or windshields. I did have to cut a small support rib out of the underside of the roof to allow this to fit. This mount is not meant to be easily adjustable on the fly. You will have to assemble and disassemble it a few times to get the tablet adjusted right where you want. The design is meant to be set in place and then never moved while being extremely sturdy and stable. I printed using ABS in the shown orientations with tree supports, 6 walls, tops, and bottoms, and 30% gyroid infill. The mount is offset to one side to accommodate my specific application but I've included both the native SW files and .x_t files in case anyone needs to modify the offset. Hardware List, all are 1/4-20:
1x 3" bolt
2x 1.25" bolt
2x 1" bolt
5x nylon lock nut
6x flat washer (0.625" OD)
| offset_slider.SLDPRT | 264.9KB | |
| offset_slider.STL | 82.7KB | |
| offset_slider.x_t | 83.8KB | |
| Tablet_1.75_Cage_Clamp_Bottom_2.SLDPRT | 502.5KB | |
| Tablet_1.75_Cage_Clamp_Bottom_2.STL | 112.2KB | |
| Tablet_1.75_Cage_Clamp_Bottom_2.x_t | 118.2KB | |
| Tablet_1.75_Cage_Clamp_Top.SLDPRT | 325.1KB | |
| Tablet_1.75_Cage_Clamp_Top.STL | 87.6KB | |
| Tablet_1.75_Cage_Clamp_Top.x_t | 131.2KB |
