This has some of the improvements from my Magnetically Sealed Pokemon TCG Deck box, but also is split for multi-material printing. For obvious reasons, I would recommend red, black, and white.
(edit) I updated the design to be more structurally sound by adding liners to both parts. While I was in there, I also refactored the code for faster rendering in OpenSCAD. I've also added parts for dice or fancy metal coins for those who have them.
Things that are changed from the original jessed design:
There are slots in the lid and base for 1x10x20mm magnets to hold the box sealed
Coin holder nubbins are 3 spheres instead of 4 cylinders (has worked better for me)
The pads that needed to be cut off are not there
Updated the file to get rid of the deprecated "assign" function
I've also uploaded the source file so you can modify as you please.
Printed great with default settings on my Prusa MK3S with MMU2s.
| basic_deckbox.scad | 5.2KB | |
| pokebox.scad | 12.0KB | |
| pokebox_base.stl | 741.5KB | |
| pokebox_base_mmu_bottom.stl | 385.1KB | |
| pokebox_base_mmu_center.stl | 285.5KB | |
| pokebox_base_mmu_top.stl | 272.4KB | |
| pokebox_dice_base.stl | 1.7MB | |
| pokebox_dice_base_mmu_bottom.stl | 1.6MB | |
| pokebox_dice_base_mmu_center.stl | 289.7KB | |
| pokebox_dice_base_mmu_top.stl | 622.6KB | |
| pokebox_lid_metal_coin.stl | 1.1MB | |
| pokebox_lid_metal_coin_mmu_bottom.stl | 148.0KB | |
| pokebox_lid_metal_coin_mmu_center.stl | 1.1MB | |
| pokebox_lid_metal_coin_mmu_top.stl | 145.7KB | |
| pokebox_lid_plastic_coin_mmu_bottom.stl | 149.0KB | |
| pokebox_lid_plastic_coin_mmu_center.stl | 4.5MB | |
| pokebox_lid_plastic_coin_mmu_top.stl | 146.7KB |
