Pokemon Trading Card Stand.
Perfect fit for the popular "Ultra-Pro" top-loaders (3"x4" regular size).
I'd tried a few models and found them to be unstable or too space-consuming, so I wanted to create a stand that presented the cards well, while remaining sturdy and small enough for lining up multiple cards.
This stand has minimal width to ensure cards can be lined up side-by-side.
Slightly stretched on the reverse to help with stability, though remains stable regardless of which way round it's used.
I printed at 20% infill with shell count at 3, so it's nice and sturdy,
With 0.16mm layer height and 50mm speed print time was ~90mins.
You can increase layer height to 0.2, speed to 60mm and reduce infil to 10-15% for close to 60 min print time.
Raft isn't necessary, I just printed with a small brim.
No supports required.
I don't expect tips, but if you enjoy this model, please visit us on
http://instagram.com/pokemonzone.uk
and
https://www.tiktok.com/@pokemon.zone
| PokemonStand.stl | 359.1KB |
