Pokemon Card Deck Holder Case – Stronger, Simpler And Less Filament 3D Printer Model
The file 'Pokemon Card Deck Holder Case – Stronger, Simpler And Less Filament 3D Printer Model' is (STL) file type, size is 391.9KB.
The file 'Pokemon Card Deck Holder Case – Stronger, Simpler And Less Filament 3D Printer Model' is (STL) file type, size is 391.9KB.
This is for my son who's just decided to get into Pokemon cards and it should hold 50-60 plus easily. I've learnt from previous case builds that children will easily destroy 3D printed things if they aren't thick enough! I beefed up the walls on this as well as the logo on top, removed the logo from the size and the little compartment at the bottom for holding coins. As a result of this I was able to make it use a lot less material on the bottom as well as gain extra space inside as I've found that 50 brand new cards take up much less space than 50 used cards. I also made an even taller version that can hold even more cards.
The taller one is the one you can see in the make photos holding 50 cards.
The lid will hold itself on, but it's easy to remove. If you want a tighter fit, you could reduce the size of the lid in the X and & dimensions by 1 or 2 percent in the slicer or increase your flow percentage by 5-10%.
| Box_Bottom_new.STL | 64.3KB | |
| Box_Bottom_new_taller.STL | 72.0KB | |
| box_top_no_logo_cleaned.STL | 496.4KB | |
| box_top_no_logo_cleaned_taller.STL | 511.4KB |
